O-Rings

We have evolved the classic compression moulding in a system capable of producing large O-Rings, CO.SM.O (Compression Step Moulding for O-Rings), with very high performance without maximum limit of internal diameter, without the need for moulds, without minimum quantity constraints.

Two main characteristics: cross sections from 2.62 to 60.00 mm and minimum internal diameter of 200.00 mm, to infinity.

Our O-Rings

Cross sections available:

2,625,508,0010,8216,0025,00
3,005,708,2011,0017,0025,86
3,506,008,4012,0018,0026,00
3,536,358,5012,7019,0028,00
4,006,509,0013,0019,2030,00
4,507,009,5014,0020,0032,00
5,007,109,6514,4022,0040,00
5,337,5010,0015,0024,0060,00

Although our products cannot be considered “standard”, we apply tolerances according to international standards, integrating the values not covered by them (cross sections exceeding 8.40 mm).

We produce O-Rings in all these materials, with certifications for food use (FDA, 3A Sanitary Standards, USP) available and for AED use (Norsok M710).

 

Take note: for VMQ materials, the minimum producible cross section is 3,53 mm.

NBR
HNBR
EPDM
EPDM PEROX
FKM
FFKM
CR
FEPM AFLAS
VMQ

How we deliver our O-Rings

STANDARD
(included in the price)

ALTERNATIVE
(applicable additional costs)

Box

BLUBOX ORINGONE 400x400x100/200/300 (mm)

NEUTRAL HAVANA (without extra charge) 400x400x100/200/300 (mm)

Bag

500x500 (mm) WHITE LDPE Anti UV - Standard Quantity pieces/bag (see Table) or Customized (paid option)

500x500 (mm) Clear LDPE Anti UV- Standard Quantity pieces/bag (see Table) or Customized (paid option)

Label

80x90 (mm) STANDARD ORINGONE (Custom references without surcharge - see limits)

80x90 (mm) NEUTRAL (Custom references without surcharge - see limits)

Documentation

Packing list Certificate 3.1 (dimensional and hardness report)

Packing list Certificate 3.1 (dimensional and hardness report)